Laboratory Performance Evaluation of High Modulus Asphalt Concrete Modified with Different Additives
Simulation of Permanent Deformation in High-Modulus Asphalt Pavement with Sloped and Horizontally Curved Alignment
Fatigue Life Prediction of High Modulus Asphalt Concrete Based on the Local Stress-Strain Method
A Study on Evaluation and Application of Snowmelt Performance of Anti-Icing Asphalt Pavement
Effect of nano silica and pretreated rubber on the properties of terminal blend crumb rubber modified asphalt
Novel BaTiO3/PVDF composites with enhanced electrical properties modified by calcined BaTiO3 ceramic powders
Investigation of the relative abrasion resistance of concrete pavement with chip-sprinkled surfaces
Optimization of bio-asphalt using bio-oil and distilled water
High temperature performance of SBS modified bio-asphalt
Development of morphological properties of road surfacing aggregates during the polishing process
Study of the Preparation and Dielectric Property ofPP/SMA
Mechanical property and analysis of asphalt components based on molecular dynamics simulation.
Effect of polymer matrix on the electrical Properties of PZT/Polymer Composites
Optimal synthetic conditions for oxetane-substituted chitosan (OXE-CHI) and polyethylene glycol(PEG) network self-healing agent
Impact of doping phase on the electrical properties of PZT-PVDF
Curing process and properties of hydrogenated bisphenol a epoxy resin particles by an interfacial polymerization method for asphalt pavements
Design and performance validation of high-performance cement paste as a grouting material for semi-flexible pavement
Effect of preparation techniques on structural and electrical properties of PZT/PVDF composites,
Utilization of steel slag as aggregate in asphalt mixtures for microwave deicing
Comprehensive service properties evaluation of composite grouting materials with high-performance cement paste for semi-flexible pavement1
Study on the optimum rice husk ash content added in asphalt binder and its modification with bio-oil
Solar heating reflective coating layer (SHRCL) to cool the asphalt pavement surface
Evaluation and Analysis of Variance of Storage Stability of Asphalt Binder Modified by Nanotitanium Dioxide
Effects of modifier content on high-modulus asphalt mixture and prediction of fatigue property using Weibull theory
Shear fatigue formula between asphalt pavement layers and its application in design
Mechanical Response of Typical Cement Concrete Pavements under Impact Loading
Development and performance of sand fog seal with cooling and air purification effects
Emission Reduction Performance of Modified Hot Mix Asphalt Mixtures
Automobile Exhaust–Purifying Performance of Tourmaline-Modified Asphalt Concrete
Characterizing the three-stage rutting behavior of asphalt pavement with semi-rigid base by using UMAT in ABAQUS
Failure Mode and Bonding Evaluation at the Interface between Asphalt Surface and Semirigid Base
Evaluation indices of asphalt-filler interaction ability and the filler critical volume fraction based on the complex modulus
Evaluation of aggregate gradation and distributing homogeneity based on the images of asphalt mixture
Energy harvesting from asphalt pavement using thermoelectric technology
Effects of Nominal Maximum Aggregate Size on the Performance of Stone Matrix Asphalt
A quantitative rating system for pollutant emission reduction of asphalt mixture
Comment on “Free vibration analysis of nonlocal strain gradient beams made of functionally graded material”
On vibrations of nonlocal rods Boundary conditions, exact solutions and their asymptotics
The deterioration and performance improvement of long-term mechanical properties of warm-mix asphalt mixtures under special environmental conditions
Accurate detection method for compaction uniformity of asphalt pavement
Bending and buckling of nonlocal strain gradient elastic beams
Homogenization of hexagonal and re-entrant hexagonal structures and wave propagation of the sandwich plates with symplectic analysis
Effects of Test Conditions on APA Rutting and Prediction Modeling for Asphalt Mixtures
Fatigue performance evaluation of asphalt mixtures based on energy-controlled loading mode
Micromechanical model for asphalt mixture coupling inter-particle effect and imperfect interface
Synthesis and thermal properties of novel microencapsulated phase-change materials with binary cores and epoxy polymer shells
Impacts of Aggregate Morphological Characteristics on Asphalt-Mixture Performance During Mixing
The influence of composition and temperature on hydrated phase assemblages in magnesium oxychloride cements
Portland Cement Hydration Behavior at Low Temperatures: Views from Calculation and Experimental Study
A laboratory study of Portland cement hydration under low temperatures
Kinetic and thermodynamic modeling of Portland cement hydration at low temperatures
A review of water transport in dense-graded asphalt mixtures
Analysis on the fatigue properties of vertical vibration compacted lime–fly ash-stabilized macadam
Influence of volumetric property on mechanical properties of vertical vibration compacted asphalt mixture
Temperature Characteristics of Porous Portland Cement Concrete during the Hot Summer Session
Analysis of physico-chemical properties for crumb rubber in process of asphalt modification
Exploring Polymer-Modified Concrete and Cementitious Coating with High-Durability for Roadside Structures in Xinjiang,China
